Aluminum dross is a byproduct generated during aluminum smelting, aluminum processing, and secondary aluminum melting. Upon contact with water, reactive constituents in the dross produce flammable and explosive gas mixtures. The fluorides may exhibit leaching toxicity.
The Zhengzhou Research Institute of Non-ferrous Metal of Aluminum Corporation of China Limited (Chalco Zhengzhou Research Institute), based in Zhengzhou in Henan province, central China, has developed a technology for making full use of aluminum dross without generating waste water or further dross.
Reactions in a predetermined sequence
It was no easy task. The constituents of the dross include aluminum nitride and metallic aluminum, and the Gibbs free energy changes for their reactions with water are similar in magnitude. (Gibbs free energy helps predict whether a chemical reaction will happen naturally.) Under ambient conditions, ammonia, hydrogen and methane are released simultaneously and cannot be collected separately.
To tackle this core challenge, the research team made different reactive components react one after another in a predetermined sequence, rather than all at once. This required precise control of the reaction process at a micro level.
After thousands of comparative experiments, they found a solution, a self-developed surface functionalization agent. This agent can generate a barrier layer on the surface of aluminum nitride particles, which temporarily restrains their reactions with water, so metallic aluminum and aluminum carbide can undergo hydrolysis first.
Hydrogen and methane accounted for more than 95 percent of the gases released during the first phase, and could be safely collected for use as fuels.
After the first-stage reaction was complete, the team added another in-house-developed composite activator to break down the barrier layer on the aluminum nitride surface, enabling efficient hydrolysis of aluminum nitride to produce ammonia. The hydrolysis rate of aluminum nitride exceeded 95 percent.
Mass production
A greater challenge came when the laboratory achievement went into mass production. From several hundred grams to several tonnes, this concerned the reconstruction of the entire engineering system, according to Yan Kun, director of the environment engineering technology institute of the Chalco Zhengzhou Research Institute.
The reaction temperature and pressure can be precisely controlled in a laboratory.
However, under industrial operating conditions, steam heating can cause significant temperature fluctuations, and vigorous reactions may lead to excessive foaming and material overflow.
In addition, the reaction process releases hydrogen continuously, posing an explosion risk. Therefore, the equipment needs to be sealed and explosion-proof, with precise temperature and pressure control. No such equipment was available in the market at that time.
Henan Huahui Nonferrous Engineering Design Co., Ltd., a subsidiary of Chalco Zhengzhou Research Institute, specializes in the engineering application of scientific and technological achievements.
The research and engineering design teams belong to the same organization, eliminating information barriers between them. The R&D personnel from Chalco Zhengzhou Research Institute are simultaneously involved in equipment selection, material selection and operating-condition design.
When design personnel identified process deficiencies during equipment development or on-site commissioning, they immediately reported them to the research team, so that the parameters could be adjusted promptly.
Recycling chain
Hydrolysis is only a means to an end. The real challenge is how to make full use of the gases, liquids and solids produced by the hydrolysis of aluminum dross. If none of these byproducts can be fully utilized, the process would simply turn one type of hazardous waste into three new problems, Yan said.
Chalco Zhengzhou Research Institute's solution was to fully utilize the gases, liquids and solids in a cascade, achieving zero emission throughout the production process.
The first step in processing aluminum dross was fine sorting.
The second stage released high-concentration ammonia gas, which was used to produce 20 percent industrial ammonia solution that meets Chinese national standards and was sold commercially.
The solid residue was the final product. The inert, alumina-rich material obtained after hydrolysis and drying had an alumina content of 70 percent to 80 percent, with its reactivity and leaching toxicity completely eliminated. It can replace bauxite in alumina production by the sintering process, be processed into refractory materials, or be used to produce water treatment agents.
The Chalco Zhengzhou Research Institute is now working with Yunnan Aluminum Co., Ltd. to develop the 2.0 version of the technology.
Source: Science and Technology Daily
Tel:86-10-65363107, 86-10-65368220, 86-10-65363106